Units AC 800 A compact and affordable batch unit with wastewater purification & recycling For the treatment and processing of: emulsion paints · varnishing facilities · glue processing · oil emulsions · water-soluble paints · flexographic printing Mode of Operation The wastewater is collected in the reaction tank (1) until it is filled to its upper mark. The filling can be done manually as well as via an external pump. After the reaction tank (1) is filled up with waste water you switch on the agitator (2) and manually add the necessary products (e.g. aquafloc*7). After the agitator (3) has automatically switched off the sludge will settle within a few minutes (sedimentation). By opening the 4 ball valves (4) above the filter box (5) the water/sludge-mixture runs into the filters. The sludge remains in the filter (5) whilst the clear water runs back into the clear water container (6). This purified water can now be reused for further cleaning. Or it can be discharged into the sewage Technical Data AC 800 Usable batch volume approx. 800 l 4 x sludge discharge ball valves 1 1/4 " 4 x aquabox* filter basket approx. 240 l 2 x Time controlled agitator approx. 0,1 kW Clear water container approx 180 l usable volume Total height approx. 1800 mm Floor space approx. 1700 x 700 mm Power supply: 230 V / 50 Hz Fuse: 10 A by FI safety switch Overview modular elements AC 800 Top