+49 (0) 7682 - 92 19 04
General informationOperating modeTechnical dataAccessories

Werkzeugreinigungs-und Wasserrecyclinganlage AC 300

The compact and cost-efficient batch-type

Washbasin* AC 300

Configuration right/left exchangeable, frame and built-in components made of stainless steel, equipped with:

  • Upper and lower storage tray made of stainless steel
  • Integrated waste water pump for filling the reaction tank
  • Connection Kit, consisting of plastic spiral coiled tube 1” + bayonet couplings
  • nivomaxx® N controls to switch off the waste water pump when the tank is full incl. control panel
  • Usable volume approx. 300 litres + 80 litres reserve in the working sink
  • Time-controlled agitator, approx. 0.12 kW
  • 2 drain valves
  • Central clean water discharge
  • Incl. 2 x aquaboxx® filter box and filter set
  • Klarwassersammler* 50
  • Discharge into canalisation (standard HT 40)

Tool cleaning
The wastewater from the waschplatz* (washbasin) is automatically transported to the reaction tank by the booster pump until the nivomaxx® probe head is switched off and the display “waste water full” lights up.

Water treatment
After pressing the “agitator on/off/time” button the required quantity of aquafloc® 7 flocculation powder (approx. 300 g) has to be added manually. After completion of the set agitation period of approx. 15 minutes, the agitator automatically switches off. The flocculated pigments can easily be distinguished in the clear water. If this is not the case, the agitators can be started again and you add some extra flocculation powder. The crucial factor for achieving a clear and optimal filtration are clear water and a large “fluffy” flock

After the sludge has settled you open he ball valve and the clean water is quickly drained through the aquaboxx® filter baskets into the clean water collector. By opening the ball valves the sludge is drained and then collected in the filter. The filtrate flows into the clean water collector and from there by free decline into the canalisation. After having thoroughly rinsed everything and closed the valves the unit is again ready for operation.

Worth Knowing
It is possible to simultaneously perform tool cleaning whilst the water treatment is taking place. In this case the usable volume is increased by approx. 80 litres of used water. Thereby it is possible to clean approx. 6 - 8 paint rollers before the maximum capacity is reached (in connection with rotoclean® H).

  • Usable volume: approx. 300 litres
  • Sludge discharge: 2 x ball valves 1¼"
  • Sludge volume aquaboxx® filter: approx. 120 litres (2 boxes with 60 litres each)
  • Time-controlled agitator 1 x  (approx. 0.12 k)
  • Volume clean water collector (standard): approx. 50 litres
  • Approximate  dimensions: 180 x 155 x 65 cm (w x h x d)

Requirements on site:

  • Fresh water supply: max. three ½" external threads, depending on equipment
  • Sludge discharge: depending on system; floor drain at max. height of 8 cm
  • Power supply: max. four power sockets secured by RCCB

Available accessories for AC 300
Accessories are not part of the basic equipment and must be ordered separately!

  • Roller cleaner: rotoclean® (N or H)
  • Brush cleaning unit: pinselmaxx® (N or H)
  • High pressure power unit: aquapower® (to be used in connection with rotoclean® H)
  • frischwassermodul* (1 or 2)
  • filtrat-hebestation* (required if no floor drain available)

Installation and tool
Free of charge with all compact units and modular systems


500 characters left

©2022 - aqua-service Industriewasserrecycling GmbH


Sofern innerhalb des Internetangebotes die Möglichkeit der Eingabe von Daten (E-Mailadresse, Namen, Anschriften) besteht, erfolgt diese freiwillig. Die aqua-service GmbH erklärt ausdrücklich, dass diese Daten nur zu Ihrer individuellen Betreuung, der Übersendung von Produktinformationen oder der Unterbreitung von Serviceangeboten gespeichert und verarbeitet werden. Die aqua-service GmbH sichert zu, dass Ihre Angaben entsprechend den geltenden datenschutzrechtlichen Bestimmungen vertraulich behandelt werden.

Data protection policy

If within the scope of the website there is a possibility of inputting data (email address, name, address), any such information is given on a voluntary basis. aqua-service GmbH explicitly declares that any such data are only saved and processed for the purpose of individual customer assistance and services, for provision of product information and for presentation of service offers. aqua-service GmbH undertakes to handle any such information with confidentiality in accordance with the currently valid data protection regulations.