The cost-efficient modular system AC 800

AC 800

• Seamless rotation-moulded containers
• All metal parts made of stainless steel
• Incl. 4 x aquaboxx^® filter boxes and filter set
• Separate water recycling unit with integrated time-controlled agitator
• Approx. 80 - 200 litres reserve in the working tank (wp1 or wp2)
• Virtually interruption-free tool cleaning
• Efficient accessories
• Expandable per modular components
• Starter pack: 30 kg flocculation powder; 30 white filters, 1 litre antischaum*
• The treated clear water can be partly reused (approx. 200 litres) or drained into the canalisation

AC 800 with water recycling

• klarwassersammler* 200 made of stainless steel
• 4 x aquaboxx^® filter container
• Automatic fresh water valve
• Fresh water conveyer set

Tool cleaning
Wastewater from the waschplatz* (washbasin) is automatically transported to the reaction tank by the booster pump until the nivomaxx^® probe head is switched off and the display “waste water full” lights up.

Water treatment
After pressing the “agitator on/off/time” button the required quantity of aquafloc^® 7 flocculation powder (approx. 800 g) has to be added manually. After completion of the set agitation period of approx. 15 minutes, the agitator automatically switches off. The flocculated pigments can easily be distinguished in the clear water. If this is not the case, the agitators can be started again and you add some extra flocculation powder. The crucial factor for achieving a clear and optimal filtration are clear water and a large “fluffy” flock.

Filtration
After the sludge has settled you open the ball valve, and the clean water is quickly drained through the aquaboxx^® filter baskets into the clean water collector. By opening the ball valves the sludge is drained and then collected in the filter The filtrate flows into the clean water collector and from there by free decline into the canalisation. After having thoroughly rinsed everything and closed the valves the unit is again ready for operation.

Worth Knowing
It is possible to simultaneously perform tool cleaning whilst the water treatment is taking place. In this case the usable volume is increased by approx. 80 - 200 litres of used water. Thereby it is possible to clean approx. 30 - 60 paint rollers before the maximum capacity is reached (in connection with rotoclean^® H)

• Sludge discharge: 2 x (ball valves 1¼")
• Sludge volume aquaboxx® filter: approx. 120 litres (2 boxes with 60 litres each)
• Time-controlled agitator 1 x (approx. 0.12 kW)
• Approx. dimension (WPS): 90 x 140 x 66 cm (w x h x d)
• Approx. dimension (WPM): 129 x 140 x 65 cm (w x h x d)
• Approx. dimension (WPL): 170 x 140 x 75 cm (w x h x d)
• Approx. dimension (AC 800): 175 x 175 x 80 cm (w x h x d)
• Requirements on site:
• Fresh water supply: max. four ½" external threads, depending on equipment
• Sludge discharge: depending on system; floor drain at max. height of 8 cm
• Power supply: max. four power sockets secured by RCCB
• *The usable volume corresponds to a cleaning capacity of approx. 30 - 60 paint rollers or brushes depending on operating pressure, type of paint and condition of roller.

• Spray pistol with 3 m pressure hose
• Roller cleaner: rotoclean® (N or H)
• pinselmaxx® Brush cleaner Type N = normal pressure approx. 3-4 bar / Type H = high pressure max. 20 bar incl. 1-clic hose
• High pressure power unit: aquapower® (to be used in connection with rotoclean® H)
• HP dual distributor (1-clic plug-in system)
• fresh water module 2
• filtrat-hebestation* (required if no floor drain available aquaboxx-easy change filter set
• spray lance Fast and effective cleaning Type N = normal pressure approx. 3-4 bar / Type H = high pressure max. 20 bar incl. 1-clic hose
• aqua-TAP - Flexible Water Tap
• Manifold - Two- and Four-Way Valve